prEVS-ISO 45002
Töötervishoiu ja tööohutuse juhtimissüsteemid. Üldised juhised ISO 45001:2018 rakendamiseks
Occupational health and safety management systems — General guidelines for the implementation of ISO 45001:2018 (identical, ISO 45002:2023)
|
1.08.2023 -
29.09.2023
|
03.100.70
13.100
|
EVS/TK 33
|
|
prEVS-ISO 17289
Vee kvaliteet. Lahustunud hapniku määramine. Optiline meetod
Water quality -- Determination of dissolved oxygen -- Optical sensor method (ISO 17289:2014, identical)
|
1.08.2023 -
29.09.2023
|
13.060.50
|
EVS/TK 47
|
|
prEN 2588
Aerospace series - Bearing, spherical plain in corrosion resisting steel with assembly slots - Dimensions and loads
|
1.08.2023 -
29.09.2023
|
49.035
|
EVS/EVS00
|
|
EN ISO 20344:2021/prA1
Personal protective equipment - Test methods for footwear - Amendment 1 (ISO 20344:2021/DAM 1:2023)
|
1.08.2023 -
29.09.2023
|
13.340.50
|
EVS/EVS00
|
|
prEN 13757-3
Communication systems for meters - Part 3: Application protocols
|
1.08.2023 -
29.09.2023
|
33.200
35.100.70
35.240.99
91.140.50
|
EVS/TK 58
|
|
prEN 13757-7
Communication systems for meters - Part 7: Transport and security services
|
1.08.2023 -
29.09.2023
|
33.200
35.100.10
35.100.20
91.140.50
|
EVS/TK 58
|
|
prEN ISO 11554
Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam radiant power, radiant energy and temporal characteristics (ISO/DIS 11554:2023)
|
1.08.2023 -
29.09.2023
|
31.260
|
EVS/EVS00
|
|
prEN ISO 642
Steel - Hardenability test by end quenching (Jominy test) (ISO/DIS 642:2023)
|
1.08.2023 -
29.09.2023
|
77.040.99
|
EVS/TK 21
|
|
prEN ISO 16946
Non-destructive testing - Ultrasonic testing - Specification for a step wedge calibration block (ISO/DIS 16946:2023)
|
1.08.2023 -
29.09.2023
|
19.100
|
EVS/TK 41
|
|
prEN 17339
Transportable gas cylinders - Fully wrapped carbon composite cylinders and tubes for hydrogen
|
1.08.2023 -
29.09.2023
|
23.020.35
|
EVS/EVS00
|
|
prEN ISO 7817
Building Information Modelling - Level of Information Need - Part 1 Concepts and principles (ISO/DIS 7817:2023)
|
1.08.2023 -
29.09.2023
|
35.240.67
91.010.01
|
EVS/TK 50
|
|
prEN 16803-4
Space - Use of GNSS-based positioning for road Intelligent Transport Systems (ITS) - Part 4 : Definitions and system engineering procedures for the design and validation of test scenarios
|
1.08.2023 -
29.09.2023
|
03.220.20
33.060.30
35.240.60
|
EVS/EVS00
|
|
prEN ISO 13428
Geosynthetics - Determination of the protection efficiency of a geosynthetic against impact damage (ISO/DIS 13428:2023)
|
1.08.2023 -
29.09.2023
|
59.080.70
91.100.50
|
EVS/TK 31
|
|
prEN ISO 10319
Geosynthetics - Wide-width tensile test (ISO/DIS 10319:2023)
|
1.08.2023 -
29.09.2023
|
59.080.70
|
EVS/TK 31
|
|
prEN 3375-011
Aerospace series - Cable, electrical for digital data transmission - Part 011: Single braid - Star Quad 100 ohms - Lightweight - Type KL - Product standard
|
1.08.2023 -
29.09.2023
|
49.060
49.090
|
EVS/EVS00
|
|
prEN ISO/IEC 27006-2
Requirements for bodies providing audit and certification of information security management systems - Part 2: Privacy information management systems (ISO/IEC/DIS 27006‑2:2023)
|
1.08.2023 -
29.09.2023
|
03.120.20
35.030
|
EVS/TK 04
|
|
prEN ISO 643
Steels - Micrographic determination of the apparent grain size (ISO/DIS 643:2023)
|
1.08.2023 -
29.09.2023
|
77.040.99
|
EVS/TK 21
|
|
EN 73:2020/prA1
Durability of wood and wood-based products - Accelerated ageing of treated wood prior to biological testing - Evaporative ageing procedure
|
1.08.2023 -
29.09.2023
|
71.100.50
|
EVS/EVS00
|
|
prEN ISO 17855-2
Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO/DIS 17855-2:2023)
|
1.08.2023 -
29.09.2023
|
83.080.20
|
EVS/EVS00
|
|
EN ISO 16140-4:2020/prA1
Microbiology of the food chain - Method validation - Part 4: Protocol for method validation in a single laboratory - Amendment 1: Validation of a larger test portion size for qualitative methods (ISO 16140-4:2020/DAM 1:2023)
|
1.08.2023 -
29.09.2023
|
07.100.30
|
EVS/TK 01
|
|
prEN ISO 7199
Cardiovascular implants and artificial organs - Blood-gas exchangers (oxygenators) (ISO/DIS 7199:2023)
|
1.08.2023 -
29.09.2023
|
11.040.40
|
EVS/TK 11
|
|
prEN 17984-6
Assistance dogs - Part 6: Accessibility and Universal Access
|
1.08.2023 -
29.09.2023
|
11.180.99
65.020.30
|
EVS/PK 66
|
|
prEN ISO 3095
Railway applications - Acoustics - Measurement of noise emitted by railbound vehicles (ISO/DIS 3095:2023)
|
1.08.2023 -
29.09.2023
|
17.140.30
45.020
|
EVS/TK 16
|
|
prEN 13084-1
Free-standing chimneys - Part 1: General requirements
|
1.08.2023 -
29.09.2023
|
91.060.40
|
EVS/EVS00
|
|
prEN 15004-1
Fixed firefighting systems - Gas extinguishing systems - Part 1: Design, installation and maintenance (ISO 14520-1:2013, modified)
|
1.08.2023 -
29.09.2023
|
13.220.20
|
EVS/TK 05
|
|
EN ISO 16140-2:2016/prA1
Microbiology of the food chain - Method validation - Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method
|
1.08.2023 -
29.09.2023
|
07.100.30
|
EVS/TK 01
|
|
EN IEC 60947-4-2:2023/prA1:2023
Amendment 1 - Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - Semiconductor motor controllers, starters and soft-starters
|
1.08.2023 -
29.09.2023
|
29.130.20
|
EVS/TK 17
|
|
EN 60317-67:2017/prA1:2023
Amendment 1 - Specifications for particular types of winding wires - Part 67: Polyvinyl acetal enamelled rectangular aluminium wire, class 105
|
1.08.2023 -
29.09.2023
|
29.060.10
|
EVS/EVS00
|
|
EN IEC 63128:2019/prA1:2023
Amendment 1 - Lighting control interface for dimming - Analogue voltage dimming interface for electronic current sourcing controlgear
|
1.08.2023 -
29.09.2023
|
29.140.99
|
EVS/TK 24
|
|
prEN IEC 61280-4-2:2023
Fibre-optic communication subsystem test procedures - Part 4-2: Installed cable plant - Single-mode attenuation and optical return loss measurement
|
1.08.2023 -
29.09.2023
|
33.180.01
|
EVS/EVS00
|
|
prEN IEC 62271-211:2023
High-voltage switchgear and controlgear - Part 211: Direct connection between power transformers and gas-insulated metal-enclosed switchgear for rated voltages above 52 kV
|
1.08.2023 -
29.09.2023
|
29.130.10
|
EVS/TK 19
|
|
prEN IEC 61846:2023
Ultrasonics - Therapeutic focused short pressure pulse sources - Characteristics of fields
|
1.08.2023 -
29.09.2023
|
11.040.50
|
EVS/EVS00
|
|
prEN IEC 82474-1:2023
Material declaration - Part 1: General requirements
|
1.08.2023 -
29.09.2023
|
01.110
13.020.01
|
EVS/EVS00
|
|
prEN IEC 63303:2023
Human-Machine Interfaces for Process Automation Systems
|
1.08.2023 -
29.09.2023
|
25.040
|
EVS/EVS00
|
|
prEN IEC 62933-1:2023
Electrical energy storage (EES) systems - Part 1: Vocabulary
|
1.08.2023 -
29.09.2023
|
01.040.17
|
EVS/EVS00
|
|
prEN 300 019-2-6 V3.0.7
Environmental Engineering (EE);
Environmental conditions and environmental tests for telecommunications equipment;
Part 2: Specification of environmental tests;
Sub-part 6: Ship environments
|
1.08.2023 -
29.09.2023
|
33
|
EVS/EVS00
|
|
prEVS-ISO 22734
Vee elektrolüüsi kasutavad vesinikugeneraatorid. Tööstuslikud, kaubanduslikud ja kodutarbija rakendused
Hydrogen generators using water electrolysis. Industrial, commercial, and residential applications (ISO 22734:2019, identical)
|
15.08.2023 -
13.10.2023
|
71.100.20
71.120.99
|
EVS/TK 80
|
|
prEN ISO 24808
Recreational diving services - Requirements for rebreather instructor training (ISO/DIS 24808:2023)
|
15.08.2023 -
13.10.2023
|
03.080.30
03.100.30
03.200.99
|
EVS/EVS00
|
|
prEN 13523-22
Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison
|
15.08.2023 -
13.10.2023
|
25.220.60
|
EVS/EVS00
|
|
prEN 13523-12
Coil coated metals - Test methods - Part 12: Resistance to scratching
|
15.08.2023 -
13.10.2023
|
25.220.60
|
EVS/EVS00
|
|
prEN 13523-1
Coil coated metals - Test methods - Part 1: Film thickness
|
15.08.2023 -
13.10.2023
|
17.040.20
25.220.60
|
EVS/EVS00
|
|
prEN 13523-3
Coil coated metals - Test methods - Part 3: Colour difference and metamerism - Instrumental comparison
|
15.08.2023 -
13.10.2023
|
25.220.60
|
EVS/EVS00
|
|
prEN 13523-29
Coil coated metals - Test methods - Part 29: Resistance to environmental soiling (Dirt pick-up and striping)
|
15.08.2023 -
13.10.2023
|
25.220.60
|
EVS/EVS00
|
|
prEN 13523-21
Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels
|
15.08.2023 -
13.10.2023
|
25.220.60
|
EVS/EVS00
|
|
prEN 13523-8
Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog)
|
15.08.2023 -
13.10.2023
|
25.220.60
|
EVS/EVS00
|
|
prEN 13523-10
Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation
|
15.08.2023 -
13.10.2023
|
25.220.60
|
EVS/EVS00
|
|
EN ISO 7029:2017/prA1
Acoustics - Statistical distribution of hearing thresholds related to age and gender - Amendment 1: Correction of parameter values for estimating the hearing threshold distribution (ISO 7029:2017/DAM 1:2023)
|
15.08.2023 -
13.10.2023
|
13.140
|
EVS/TK 61
|
|
prEN ISO 19168-1
Geographic information - Geospatial API for features - Part 1: Core (ISO/DIS 19168-1:2023)
|
15.08.2023 -
13.10.2023
|
35.240.70
|
EVS/EVS00
|
|
prEN ISO 8028
Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO/DIS 8028:2023)
|
15.08.2023 -
13.10.2023
|
23.040.70
87.100
|
EVS/EVS00
|
|
prEN 10205
Cold reduced tinmill products - Blackplate
|
15.08.2023 -
13.10.2023
|
77.140.20
77.140.50
|
EVS/TK 21
|
|
prEN ISO/IEC 15408-5
Information security, cybersecurity and privacy protection - Evaluation criteria for IT security - Part 5: Pre-defined packages of security requirements (ISO/IEC 15408-5:2022)
|
15.08.2023 -
13.10.2023
|
35.030
|
EVS/TK 04
|
|
prEN ISO/IEC 15408-4
Information security, cybersecurity and privacy protection - Evaluation criteria for IT security - Part 4: Framework for the specification of evaluation methods and activities (ISO/IEC 15408-4:2022)
|
15.08.2023 -
13.10.2023
|
35.030
|
EVS/TK 04
|
|
prEN ISO/IEC 15408-3
Information security, cybersecurity and privacy protection - Evaluation criteria for IT security - Part 3: Security assurance components (ISO/IEC 15408-3:2022)
|
15.08.2023 -
13.10.2023
|
35.030
|
EVS/TK 04
|
|
prEN ISO/IEC 15408-2
Information security, cybersecurity and privacy protection - Evaluation criteria for IT security - Part 2: Security functional components (ISO/IEC 15408-2:2022)
|
15.08.2023 -
13.10.2023
|
35.030
|
EVS/TK 04
|
|
prEN ISO/IEC 15408-1
Information security, cybersecurity and privacy protection - Evaluation criteria for IT security - Part 1: Introduction and general model (ISO/IEC 15408-1:2022)
|
15.08.2023 -
13.10.2023
|
35.030
|
EVS/TK 04
|
|
prEN 12077-2
Cranes safety - Requirements for health and safety - Part 2: Limiting and indicating devices
|
15.08.2023 -
13.10.2023
|
53.020.20
|
EVS/EVS00
|
|
prEN ISO 16321-4
Eye and face protection for occupational use - Part 4: Additional requirements for protection against biological hazards (ISO/DIS 16321-4:2023)
|
15.08.2023 -
13.10.2023
|
13.340.20
|
EVS/EVS00
|
|
prEN 12814-8
Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements
|
15.08.2023 -
13.10.2023
|
25.160.40
|
EVS/EVS00
|
|
prEN 12255-1
Wastewater treatment plants - Part 1: General construction principles
|
15.08.2023 -
13.10.2023
|
13.060.30
|
EVS/TK 48
|
|
prEN 12255-7
Wastewater treatment plants - Part 7: Biological fixed-film reactors
|
15.08.2023 -
13.10.2023
|
13.060.30
|
EVS/TK 48
|
|
prEN ISO 14912
Gas analysis - Conversion of gas mixture composition data (ISO/DIS 14912:2023)
|
15.08.2023 -
13.10.2023
|
71.040.40
|
EVS/EVS00
|
|
prEN 10335
Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption - Non alloyed electrolytic chromium/chromium oxide coated steel
|
15.08.2023 -
13.10.2023
|
67.250
77.140.50
|
EVS/TK 21
|
|
prEN 10334
Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption - Non-coated steel (blackplate)
|
15.08.2023 -
13.10.2023
|
67.250
77.140.50
|
EVS/TK 21
|
|
prEN 17988-4
Circular design of fishing gear and aquaculture equipment - Part 4: Environmental and circularity requirements and guidelines
|
15.08.2023 -
13.10.2023
|
65.150
|
|
|
EN 14276-2:2020/prA1
Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements
|
15.08.2023 -
13.10.2023
|
23.020.30
27.080
27.200
|
EVS/EVS00
|
|
EN 14276-1:2020/prA1
Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements
|
15.08.2023 -
13.10.2023
|
23.020.30
27.080
27.200
|
EVS/EVS00
|
|
prEN ISO 21135
Chemicals for the leather tanning industry - Determination of the total content of certain bisphenols (ISO/DIS 21135:2023)
|
15.08.2023 -
13.10.2023
|
59.140.30
|
EVS/EVS00
|
|
prEN ISO 16187
Footwear and footwear components - Test method to assess antibacterial activity (ISO/DIS 16187:2023)
|
15.08.2023 -
13.10.2023
|
61.060
|
EVS/EVS00
|
|
prEN ISO 8804-1
Requirements for the training of scientific divers - Part 1: Scientific divers (ISO/DIS 8804-1:2023)
|
15.08.2023 -
13.10.2023
|
03.100.30
|
EVS/EVS00
|
|
prEN ISO 8804-3
Requirements for the training of scientific divers - Part 3: Scientific diving project leader (ISO/DIS 8804-3:2023)
|
15.08.2023 -
13.10.2023
|
03.100.30
|
EVS/EVS00
|
|
prEN ISO 8804-2
Requirements for the training of scientific divers - Part 2: Advanced scientific divers (ISO/DIS 8804-2:2023)
|
15.08.2023 -
13.10.2023
|
03.100.30
|
EVS/EVS00
|
|
prEN 17988-3
Circular design of fishing gear and aquaculture equipment - Part 3: Technical requirements
|
15.08.2023 -
13.10.2023
|
65.150
|
|
|
prEN 17988-6
Circular design of fishing gear and aquaculture equipment - Part 6 - Requirements and guidance for digitalization of information on gear and components
|
15.08.2023 -
13.10.2023
|
65.150
|
|
|
prEN 17988-1
Circular design of fishing gear and aquaculture equipment - Part 1: general requirements and guidance
|
15.08.2023 -
13.10.2023
|
65.150
|
|
|
prEN 17988-5
Circular design of fishing gear and aquaculture equipment - Part 5: Circular business model
|
15.08.2023 -
13.10.2023
|
65.150
|
|
|
prEN 17988-2
Circular design of fishing gear and aquaculture equipment - Part 2: User manual and labelling
|
15.08.2023 -
13.10.2023
|
65.150
|
|
|
prEN 15895
Powder actuated hand-held fixing and hard marking tools - Safety requirements
|
15.08.2023 -
13.10.2023
|
25.140.99
|
EVS/EVS00
|
|
prEN 17860-7
Carrier cycles - Part 7: Cargo trailers
|
15.08.2023 -
13.10.2023
|
43.150
|
EVS/EVS00
|
|
prEN 17860-5
Carrier cycles - Part 5: Electrical aspects
|
15.08.2023 -
13.10.2023
|
43.150
|
EVS/EVS00
|
|
prEN 14125
Thermoplastic and flexible metal pipework for underground installation at petrol filling stations
|
15.08.2023 -
13.10.2023
|
75.200
|
EVS/EVS00
|
|
prEN ISO 5463
Geometrical product specifications (GPS) - Form measuring equipment; Rotary axis form measuring instruments - Design and metrological characteristics (ISO/DIS 5463:2023)
|
15.08.2023 -
13.10.2023
|
17.040.01
|
EVS/TK 38
|
|
prEN ISO 4080
Rubber and plastics hoses and tubing, and their assemblies - Determination of permeability to gas (ISO/DIS 4080:2023)
|
15.08.2023 -
13.10.2023
|
23.040.70
|
EVS/EVS00
|
|
prEN 1860-1
Appliances, solid fuels and firelighters for barbecueing - Part 1: Barbecues burning solid fuels - Requirements and test methods
|
15.08.2023 -
13.10.2023
|
75.160.10
97.040.20
|
EVS/EVS00
|
|
prEN ISO 23125-1
Machine tools safety - Turning machines - Part 1: Safety requirements (ISO/DIS 23125-1:2023)
|
15.08.2023 -
13.10.2023
|
25.080.01
|
EVS/EVS00
|
|
prEN ISO 6143
Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO/DIS 6143:2023)
|
15.08.2023 -
13.10.2023
|
71.040.40
|
EVS/EVS00
|
|
EN ISO 6887-1:2017/prA1
Microbiology of the food chain - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 1: General rules for the preparation of the initial suspension and decimal dilutions - Amendment 1: Requirements and guidance on the use of larger test portion size for qualitative methods (ISO 6887-1:2017/DAM1:2023)
|
15.08.2023 -
13.10.2023
|
07.100.30
|
EVS/TK 01
|
|
prEN IEC 60793-1-46:2023
Optical fibres - Part 1-46: Measurement methods and test procedures - Monitoring of changes in attenuation
|
15.08.2023 -
13.10.2023
|
33.180.10
|
EVS/EVS00
|
|
prEN IEC 60793-1-22:2023
Optical fibres - Part 1-22: Measurement methods and test procedures - Length measurement
|
15.08.2023 -
13.10.2023
|
33.180.10
|
EVS/EVS00
|
|
prEN IEC 62386-105:2023
Digital addressable lighting interface - Part 105: Particular requirements for control gear and control devices - Firmware transfer
|
15.08.2023 -
13.10.2023
|
29.140.50
29.140.99
|
EVS/TK 24
|
|
prEN IEC 60721-3-9:2023
Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 9: Microclimates inside products
|
15.08.2023 -
13.10.2023
|
19.040
|
EVS/EVS00
|
|
EN 50636-2-107:2015/prA4:2023
Safety of household and similar appliances - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers
|
15.08.2023 -
13.10.2023
|
65.060.70
|
EVS/EVS00
|
|
prEN IEC 62276:2023
Single crystal wafers for surface acoustic wave (SAW) device applications - Specifications and measuring methods
|
15.08.2023 -
13.10.2023
|
31.140
|
EVS/EVS00
|
|
prEN IEC 60156:2023
Insulating liquids - Determination of the breakdown voltage at power frequency - Test method
|
15.08.2023 -
13.10.2023
|
29.040
|
EVS/EVS00
|
|
prEN 50725
Specification for portable electrical apparatus designed to measure draught and gas pressure of heating appliances and systems
|
15.08.2023 -
13.10.2023
|
27.060.20
75.180.30
|
EVS/EVS00
|
|
EN 60601-2-68:2015/prA1:2023
Amendment 1 - Medical electrical equipment - Part 2-68: Particular requirements for the basic safety and essential performance of X-ray-based image-guided radiotherapy equipment for use with electron accelerators, light ion beam therapy equipment and radionuclide beam therapy equipment
|
15.08.2023 -
13.10.2023
|
11.040.60
|
EVS/TK 11
|
|
prEN IEC 60898-3:2023
Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 3: Circuit-breakers for DC operation
|
15.08.2023 -
13.10.2023
|
29.120.50
|
EVS/TK 17
|
|
prEN IEC 60898-3:2023/prA1:2023
Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 3: Circuit-breakers for DC operation
|
15.08.2023 -
13.10.2023
|
29.120.50
|
EVS/TK 17
|
|
prEN IEC 60898-3:2023/prAA:2023
Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 3: Circuit-breakers for DC operation
|
15.08.2023 -
13.10.2023
|
29.120.50
|
EVS/TK 17
|
|
prEN 17826
Child care articles - Chemical hazards - Requirements and test methods
|
1.09.2023 -
30.09.2023
|
97.190
|
EVS/EVS00
|
|
prEN 10242
Threaded pipe fitting in malleable cast iron
|
1.09.2023 -
30.09.2023
|
23.040.40
|
EVS/TK 21
|
|
prEN IEC 61300-2-34:2023
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-34: Tests - Resistance to solvents and contaminating fluids
|
1.09.2023 -
30.09.2023
|
33.180.20
|
EVS/EVS00
|
|
prEN IEC 60794-1-217:2023
Optical fibre cables - Part 1-217: Generic specification - Basic optical cable test procedures - Environmental test methods - Cable shrinkage (fibre protrusion), Method F17
|
1.09.2023 -
30.09.2023
|
33.180.10
|
EVS/EVS00
|
|
prEN IEC 60794-1-212:2023
Optical fibre cables - Part 1-212: Generic specification - Basic optical cable test procedures - Environmental test methods - Temperature cycling with cable elements fixed at both ends, Method F12
|
1.09.2023 -
30.09.2023
|
33.180.10
|
EVS/EVS00
|
|
prEVS 670
Kaubapõlevkivi
Commercial oil shale
|
1.09.2023 -
30.10.2023
|
75.160.10
|
EVS/TK 57
|
|
prEVS-ISO/IEC 20000-2+A1
Infotehnoloogia. Teenusehaldus. Osa 2: Juhised teenusehalduse süsteemide rakendamiseks
Information technology -- Service management -- Part 2: Guidance on the application of service management systems (ISO/IEC 20000-2:2019, identical + ISO/IEC 20000-2:2019/Amd 1:2020, identical)
|
1.09.2023 -
30.10.2023
|
03.080.99
35.020
|
EVS/TK 04
|
|
prEVS-ISO/IEC 27035-1
Infotehnoloogia - Infoturvaintsidentide haldus - Osa 1: Põhimõtted ja protsess
Information technology — Information security incident management — Part 1: Principles and process (ISO/IEC 27035-1, identical)
|
1.09.2023 -
30.10.2023
|
35.030
|
EVS/TK 04
|
|
prEVS JUHEND 2
Eesti standardi ja EVS-i standardilaadse dokumendi koostamine
Development of an Estonian Standard and of an EVS publication
|
1.09.2023 -
30.10.2023
|
01.120
|
EVS/EVS00
|
|
EN 61850-6:2010/prA2:2023
Communication networks and systems for power utility automation - Part 6: Configuration description language for communication in electrical substations related to IEDs
|
1.09.2023 -
30.10.2023
|
33.200
|
EVS/TK 58
|
|
EN IEC 60317-82:2020/prA1:2023
Specifications for particular types of winding wires - Part 82: Polyesterimide enamelled rectangular copper wire, class 200
|
1.09.2023 -
30.10.2023
|
29.060.10
|
EVS/EVS00
|
|
EN IEC 60317-74:2018/prA1:2023
Specifications for particular types of winding wires - Part 74: Polyesterimide enamelled rectangular aluminium wire, class 180
|
1.09.2023 -
30.10.2023
|
29.060.10
|
EVS/EVS00
|
|
EN IEC 60317-73:2018/prA1:2023
Specifications for particular types of winding wires - Part 73: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular aluminium wire, class 200
|
1.09.2023 -
30.10.2023
|
29.060.10
|
EVS/EVS00
|
|
EN 60317-69:2017/prA1:2023
Specifications for particular types of winding wires - Part 69: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular aluminium wire, class 220
|
1.09.2023 -
30.10.2023
|
29.060.10
|
EVS/EVS00
|
|
EN 60317-68:2017/prA2:2023
Specifications for particular types of winding wires - Part 68: Polyvinyl acetal enamelled rectangular aluminium wire, class 120
|
1.09.2023 -
30.10.2023
|
29.060.10
|
EVS/EVS00
|
|
EN 60317-59:2016/prA1:2023
Amendment 1 - Specifications for particular types of winding wires - Part 59: Polyamide-imide enamelled round copper wire, class 240
|
1.09.2023 -
30.10.2023
|
29.060.10
|
EVS/EVS00
|
|
EN 60317-58:2010/prA1:2023
Amendment 1 - Specifications for particular types of winding wires - Part 58: Polyamide-imide enameled rectangular copper wire, class 220
|
1.09.2023 -
30.10.2023
|
29.060.10
|
EVS/EVS00
|
|
EN 60317-57:2010/prA1:2023
Amendment 1 - Specifications for particular types of winding wires - Part 57: Polyamide-imide enameled round copper wire, class 220
|
1.09.2023 -
30.10.2023
|
29.060.10
|
EVS/EVS00
|
|
EN 60317-47:2014/prA1:2023
Amendment 1 - Specifications for particular types of winding wires - Part 47: Aromatic polyimide enamelled rectangular copper wire, class 240
|
1.09.2023 -
30.10.2023
|
29.060.10
|
EVS/EVS00
|
|
EN 60317-46:2014/prA1:2023
Amendment 1 - Specifications for particular types of winding wires - Part 46: Aromatic polyimide enamelled round copper wire, class 240
|
1.09.2023 -
30.10.2023
|
29.060.10
|
EVS/EVS00
|
|
EN 60317-38:2014/prA1:2023
Amendment 1 - Specifications for particular types of winding wires - Part 38: Polyester or polyesterimide overcoated with polyamide-imide, enamelled round copper wire, class 200, with a bonding layer
|
1.09.2023 -
30.10.2023
|
29.060.10
|
EVS/EVS00
|
|
EN 60317-37:2014/prA1:2023
Amendment 1 - Specifications for particular types of winding wires - Part 37: Polyesterimide enamelled round copper wire, class 180, with a bonding layer
|
1.09.2023 -
30.10.2023
|
29.060.10
|
EVS/EVS00
|
|
EN 60317-36:2014/prA2:2023
Amendment 2 - Specifications for particular types of winding wires - Part 36: Solderable polyesterimide enamelled round copper wire, class 180, with a bonding layer
|
1.09.2023 -
30.10.2023
|
29.060.10
|
EVS/EVS00
|
|
EN 60317-35:2014/prA2:2023
Amendment 2 - Specifications for particular types of winding wires - Part 35: Solderable polyurethane enamelled round copper wire, class 155, with a bonding layer
|
1.09.2023 -
30.10.2023
|
29.060.10
|
EVS/EVS00
|
|
EN 60317-28:2014/prA1:2023
Amendment 1 - Specifications for particular types of winding wires - Part 28: Polyesterimide enamelled rectangular copper wire, class 180
|
1.09.2023 -
30.10.2023
|
29.060.10
|
EVS/EVS00
|
|
EN IEC 60317-27-4:2020/prA1:2023
Amendment 1 - Specifications for particular types of winding wires - Part 27-4: Paper tape covered rectangular aluminium wire
|
1.09.2023 -
30.10.2023
|
29.060.10
|
EVS/EVS00
|
|
EN IEC 60317-27-3:2019/prA1:2023
Amendment 1 - Specifications for particular types of winding wires - Part 27-3: Paper tape covered rectangular copper wire
|
1.09.2023 -
30.10.2023
|
29.060.10
|
EVS/EVS00
|
|
EN IEC 60317-27-2:2020/prA1:2023
Amendment 1 - Specifications for particular types of winding wires - Part 27-2: Paper tape covered round aluminium wire
|
1.09.2023 -
30.10.2023
|
29.060.10
|
EVS/EVS00
|
|
EN 60317-15:2004/prA2:2023
Amendment 2 - Specifications for particular types of winding wires - Part 15: Polyesterimide enamelled round aluminium wire, class 180
|
1.09.2023 -
30.10.2023
|
29.060.10
|
EVS/EVS00
|
|
EN 60317-13:2010/prA1:2023
Amendment 1 - Specifications for particular types of winding wires - Part 13: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200
|
1.09.2023 -
30.10.2023
|
29.060.10
|
EVS/EVS00
|
|
EN IEC 60317-12:2020/prA1:2023
Amendment 1 - Specifications for particular types of winding wires - Part 12: Polyvinyl acetal enamelled round copper wire, class 120
|
1.09.2023 -
30.10.2023
|
29.060.10
|
EVS/EVS00
|
|
EN 60317-8:2010/prA1:2023
Amendment 1 - Specifications for particular types of winding wires - Part 8: Polyesterimide enamelled round copper wire, class 180
|
1.09.2023 -
30.10.2023
|
29.060.10
|
EVS/EVS00
|
|
EN 60317-0-9:2015/prA1:2023
Amendment 1 - Specifications for particular types of winding wires - Part 0-9: General requirements - Enamelled rectangular aluminium wire
|
1.09.2023 -
30.10.2023
|
29.060.10
|
EVS/EVS00
|
|
prEN IEC 62382:2023
Control systems in the process industry - Electrical and instrumentation loop check
|
1.09.2023 -
30.10.2023
|
25.040.40
|
EVS/EVS00
|
|
prEN IEC 62381:2023
Automation systems in the process industry - Factory acceptance test (FAT), site acceptance test (SAT), and site integration test (SIT)
|
1.09.2023 -
30.10.2023
|
25.040.40
|
EVS/EVS00
|
|
prEN 50708-1-1:2023
Power transformers - Additional European requirements - Part 1-1: Common part - General requirements
|
1.09.2023 -
30.10.2023
|
29.180
|
EVS/TK 19
|
|
EN IEC 61400-24:2019/prA1:2023
Wind energy generation systems - Part 24: Lightning protection
|
1.09.2023 -
30.10.2023
|
27.180
|
EVS/EVS00
|
|
prEN ISO 9241-115
Ergonomics of human-system interaction - Part 115: Guidance on conceptual design, user-system interaction design, user interface design, and navigation design (ISO/DIS 9241-115:2023)
|
1.09.2023 -
30.10.2023
|
13.180
|
EVS/EVS00
|
|
EN ISO 10519:2015/prA1
Rapeseed - Determination of chlorophyll content - Spectrometric method - Amendment 1: Preparation of the calibration curve to determine the k factor (ISO 10519:2015/DAM 1:2023)
|
1.09.2023 -
30.10.2023
|
67.200.20
|
EVS/TK 01
|
|
prEN 3475-513
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 513: Deformation resistance (installation with plastic cable ties)
|
1.09.2023 -
30.10.2023
|
49.060
|
EVS/EVS00
|
|
prEN 16156
Cigarettes - Assessment of the ignition propensity - Safety requirement
|
1.09.2023 -
30.10.2023
|
13.220.40
65.160
|
EVS/TK 05
|
|
prEN ISO 14903
Refrigerating systems and heat pumps - Qualification of tightness of components and joints (ISO/DIS 14903:2023)
|
1.09.2023 -
30.10.2023
|
27.080
27.200
|
EVS/EVS00
|
|
prEN ISO 3677
Filler metal for brazing - Designation (ISO/DIS 3677:2023)
|
1.09.2023 -
30.10.2023
|
25.160.50
|
EVS/TK 41
|
|
EN ISO 7301:2022/prA1
Rice - Specification - Amendment 1 (ISO 7301:2021/DAM 1:2023)
|
1.09.2023 -
30.10.2023
|
67.060
|
EVS/TK 01
|
|
prEN 17399
Algae and algae products - Terms and definitions
|
1.09.2023 -
30.10.2023
|
01.040.13
13.020.55
|
|
|
prEN ISO 80369-6
Small bore connectors for liquids and gases in healthcare applications - Part 6: Connectors for neural applications (ISO/DIS 80369-6:2023)
|
1.09.2023 -
30.10.2023
|
11.040.25
|
EVS/TK 11
|
|
prEN ISO 14146
Radiological protection - Criteria and performance limits for the periodic evaluation of dosimetry services (ISO/DIS 14146:2023)
|
1.09.2023 -
30.10.2023
|
13.280
|
EVS/TK 28
|
|
prEN 1434-3
Thermal energy meters - Part 3: Data exchange and interfaces
|
1.09.2023 -
30.10.2023
|
17.200.10
|
EVS/TK 58
|
|
prEN ISO 12224-2
Flux cored solder wire - Specification and test methods - Part 2: Determination of flux content (ISO/DIS 12224-2:2023)
|
1.09.2023 -
30.10.2023
|
25.160.20
25.160.50
|
EVS/TK 41
|
|
prEN ISO 12224-1
Solder wire, solid and flux cored - Specification and test methods - Part 1: Classification and performance requirements (ISO/DIS 12224‑1:2023)
|
1.09.2023 -
30.10.2023
|
25.160.50
|
EVS/TK 41
|
|
EN ISO 11782-2:2008/prA1
Corrosion of metals and alloys - Corrosion fatigue testing - Part 2: Crack propagation testing using precracked specimens - Amendment 1 (ISO 11782-2:1998/DAM 1:2023)
|
1.09.2023 -
30.10.2023
|
77.060
|
EVS/EVS00
|
|
prEN ISO 11890-1
Paints and varnishes - Determination of volatile organic compounds (VOC) and/or semi volatile organic compounds (SVOC) content - Part 1: Gravimetric method for VOC determination (ISO/DIS 11890-1:2023)
|
1.09.2023 -
30.10.2023
|
87.040
|
EVS/EVS00
|
|
prEN ISO 14607
Non-active surgical implants - Mammary implants - Particular requirements (ISO/DIS 14607:2023)
|
1.09.2023 -
30.10.2023
|
11.040.40
|
EVS/TK 11
|
|
prEN 13124-2
Windows, doors, shutters and curtain walling - Explosion resistance - Test method - Part 2: Arena test
|
1.09.2023 -
30.10.2023
|
13.230
91.060.50
|
EVS/TK 15
|
|
prEN 13123-2
Windows, doors, shutters and curtain walling - Explosion resistance - Requirements and classification - Part 2: Arena test
|
1.09.2023 -
30.10.2023
|
13.230
91.060.50
|
EVS/TK 15
|
|
prEN 4709-006
Aerospace series - Unmanned Aircraft Systems - Part 006: Means to terminate flight, requirements, and verification
|
1.09.2023 -
30.10.2023
|
03.220.50
49.020
|
|
|
prEN 4709-005
Aerospace series - Unmanned Aircraft Systems - Part 005: Verification method for the Geocaging function
|
1.09.2023 -
30.10.2023
|
03.220.50
49.020
|
|
|
prEVS-ISO 7507-2
Toornafta ja vedelad naftatooted. Vertikaalsete silindriliste mahutite kalibreerimine. Osa 2: Optilise tugijoone meetod või elektro-optiline kauguste mõõtemeetod
Petroleum and liquid petroleum products — Calibration of vertical cylindrical tanks — Part 2: Optical-reference-line method or
electro-optical distance-ranging
method (ISO 7507-2:2022, identical)
|
1.09.2023 -
30.10.2023
|
75.180.30
|
EVS/TK 38
|
|
prEVS-ISO/IEC/IEEE 15288
Süsteemi- ja tarkvaratehnika. Süsteemi elutsükli protsessid
Systems and software engineering — System life cycle processes (ISO/IEC/IEEE 15288:2023, identical)
|
1.09.2023 -
30.10.2023
|
35.080
|
EVS/TK 04
|
|
prEN ISO 21388-2
Acoustics - Hearing Aid Fitting Management - Part 2: Tele-services as part of hearing aid fitting management (tHAFM) (ISO/DIS 21388-2:2023)
|
1.09.2023 -
30.10.2023
|
11.020.10
11.180.15
17.140.01
|
EVS/TK 61
|
|
prEN ISO 17664-2
Processing of health care products - Information to be provided by the medical device manufacturer for the processing of medical devices - Part 2: Non-critical medical devices (ISO 17664-2:2021)
|
1.09.2023 -
30.10.2023
|
11.080.01
|
EVS/TK 11
|
|
prEN 18031-3
Common security requirements for radio equipment - Part 3: Internet connected radio equipment processing virtual money or monetary value
|
1.09.2023 -
30.10.2023
|
33.060
|
EVS/TK 04
|
|
prEN 18031-2
Common security requirements for radio equipment - Part 2: radio equipment processing data, namely Internet connected radio equipment, childcare radio equipment, toys radio equipment and wearable radio equipment
|
1.09.2023 -
30.10.2023
|
33.060
|
EVS/TK 04
|
|
prEN 18031-1
Common security requirements for radio equipment - Part 1: Internet connected radio equipment
|
1.09.2023 -
30.10.2023
|
33.060
|
EVS/TK 04
|
|
prEN ISO 14116
Protective clothing - Protection against flame - Limited flame spread materials, material assemblies and clothing (ISO/DIS 14116:2023)
|
1.09.2023 -
30.10.2023
|
13.340.10
|
EVS/TK 71
|
|
prEN ISO 11612
Protective clothing - Clothing to protect against heat and flame - Minimum performance requirements (ISO/DIS 11612:2023)
|
1.09.2023 -
30.10.2023
|
13.340.10
|
EVS/TK 71
|
|
prEN 16662-3
Road vehicles - Supplementary grip devices for tyres of passenger cars and light duty vehicles - Part 3: Production control (self monitoring) and third-party surveillance
|
1.09.2023 -
30.10.2023
|
83.160.10
|
EVS/EVS00
|
|
prEN 16662-2
Road vehicles - Supplementary grip devices for tyres of passenger cars and light duty vehicles - Part 2: Specific test procedures
|
1.09.2023 -
30.10.2023
|
83.160.10
|
EVS/EVS00
|
|
prEN ISO 8536-13
Infusion equipment for medical use - Part 13: Graduated flow regulators for single use with fluid contact (ISO/DIS 8536-13:2023)
|
1.09.2023 -
30.10.2023
|
11.040.20
|
EVS/TK 11
|
|
prEN ISO 18081
Non-destructive testing - Acoustic emission testing (AT) - Leak detection by means of acoustic emission (ISO/DIS 18081:2023)
|
1.09.2023 -
30.10.2023
|
19.100
|
EVS/TK 41
|
|
prEN 13126-9
Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 9: Hardware for horizontal and vertical pivot windows
|
1.09.2023 -
30.10.2023
|
91.190
|
EVS/TK 15
|
|
prEN 14620-5
Design and manufacture of site built, vertical, cylindrical, flat-bottomed tank systems for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -196 °C - Part 5: Testing, drying, purging and cool-down
|
1.09.2023 -
30.10.2023
|
23.020.10
|
EVS/EVS00
|
|
prEN 1793-6
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 6: Intrinsic characteristics - In situ values of airborne sound insulation under direct sound field conditions
|
1.09.2023 -
30.10.2023
|
17.140.30
93.080.30
|
EVS/TK 31
|
|
prEN 1793-1
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics of sound absorption under diffuse sound field conditions
|
1.09.2023 -
30.10.2023
|
17.140.30
93.080.30
|
EVS/TK 31
|
|
prEN 1793-3
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 3: Normalized traffic noise spectrum
|
1.09.2023 -
30.10.2023
|
17.140.30
93.080.30
|
EVS/TK 31
|
|
prEN 1793-4
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction
|
1.09.2023 -
30.10.2023
|
17.140.30
93.080.30
|
EVS/TK 31
|
|
prEN 1793-5
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - In situ values of sound reflection under direct sound field conditions
|
1.09.2023 -
30.10.2023
|
17.140.30
93.080.30
|
EVS/TK 31
|
|
prEN 1793-2
Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics of airborne sound insulation under diffuse sound field conditions
|
1.09.2023 -
30.10.2023
|
17.140.30
93.080.30
|
EVS/TK 31
|
|
EN IEC 62841-4-4:202X/prA1:2023
Amendment 1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-4: Particular requirements for lawn trimmers, lawn edge trimmers, grass trimmers, brush cutters and brush saws
|
1.09.2023 -
30.10.2023
|
25.140.20
|
EVS/EVS00
|
|
prEN IEC 60794-1-101:2023
Optical fibre cables - Part 1-101: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Tensile, method E1
|
1.09.2023 -
30.10.2023
|
33.180.10
|
EVS/EVS00
|
|
prEN IEC 60794-1-104:2023
Optical fibre cables - Part 1-104: Generic specification - Basic optical cable test procedures - Mechanical tests method - Impact, method E4
|
1.09.2023 -
30.10.2023
|
33.180.10
|
EVS/EVS00
|
|
prEN IEC 60317-0-3:2023
Specifications for particular types of winding wires - Part 0-3: General requirements - Enamelled round aluminium wire
|
1.09.2023 -
30.10.2023
|
29.060.10
|
EVS/EVS00
|
|
EN IEC 61753-071-02:2020/prA1:2023
Fibre optic interconnecting devices and passive components - Performance standard - Part 071-02: Non-connectorized single-mode fibre optic 1 × 2 and 2 × 2 spatial switches for category C - Controlled environments
|
1.09.2023 -
30.10.2023
|
33.180.20
|
EVS/EVS00
|
|
prEN IEC 60793-1-40:2023
Optical fibres - Part 1-40: Attenuation measurement methods
|
1.09.2023 -
30.10.2023
|
33.180.10
|
EVS/EVS00
|
|
prEN IEC 60384-9:2023
Fixed capacitors for use in electronic equipment - Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2
|
1.09.2023 -
30.10.2023
|
31.060.20
|
EVS/EVS00
|
|
prEN IEC 60384-8:2023
Fixed capacitors for use in electronic equipment - Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class 1
|
1.09.2023 -
30.10.2023
|
31.060.20
|
EVS/EVS00
|
|
prEN IEC 62933-5-1:2023
Electrical energy storage (EES) systems - Part 5-1: Safety considerations for grid-integrated EES systems - General specification
|
1.09.2023 -
30.10.2023
|
13.020.30
|
EVS/EVS00
|
|
prEN IEC 60747-15:2023
Semiconductor devices - Part 15: Discrete devices - Isolated power semiconductor devices
|
1.09.2023 -
30.10.2023
|
31.080.99
|
EVS/EVS00
|
|
prHD 60364-7-711:2023
Low-voltage electrical installations - Part 7-711: Requirements for special installations or locations - Temporary electrical installations for exhibitions and entertainment related purposes
|
1.09.2023 -
30.10.2023
|
29.020
91.140.50
|
EVS/TK 17
|
|
prEN IEC 61810-7-11:2023
Electrical relays - Tests and Measurements - Part 7-11: Enclosure Protection and Degree of Protection
|
1.09.2023 -
30.10.2023
|
29.120.70
|
EVS/EVS00
|
|
prEN IEC 61810-7-13:2023
Electrical relays - Tests and Measurements - Part 7-13: Corrosive atmospheres - Polluted atmospheres
|
1.09.2023 -
30.10.2023
|
29.120.70
|
EVS/EVS00
|
|
prEN IEC 61810-7-12:2023
Electrical relays - Tests and Measurements - Part 7-12: Internal Moisture
|
1.09.2023 -
30.10.2023
|
29.120.70
|
EVS/EVS00
|
|
prEN IEC 61810-7-43:2023
Electrical relays - Tests and Measurements - Part 7-43: Proof tracking index (PTI)
|
1.09.2023 -
30.10.2023
|
29.120.70
|
EVS/EVS00
|
|
prEN IEC 61810-7-19:2023
Electrical relays - Tests and Measurements - Part 7-19: Electrical endurance
|
1.09.2023 -
30.10.2023
|
29.120.70
|
EVS/EVS00
|
|
prEN IEC 61810-7-7:2023
Electrical relays - Tests and Measurements - Part 7-7: Functional Tests
|
1.09.2023 -
30.10.2023
|
29.120.70
|
EVS/EVS00
|
|
prEN IEC 61810-7-17:2023
Electrical relays - Tests and Measurements - Part 7-17: Shock, Acceleration and Vibration
|
1.09.2023 -
30.10.2023
|
29.120.70
|
EVS/EVS00
|
|
prEN IEC 61810-7-15:2023
Electrical relays - Tests and Measurements - Part 7-15: Robustness of Terminals
|
1.09.2023 -
30.10.2023
|
29.120.70
|
EVS/EVS00
|
|
prEN IEC 61810-7-2:2023
Electrical relays - Tests and Measurements - Part 7-2: Mechanical tests and weighing
|
1.09.2023 -
30.10.2023
|
29.120.70
|
EVS/EVS00
|
|
prEN IEC 61810-7-36:2023
Electrical relays - Tests and Measurements - Part 7-36: Fire hazard
|
1.09.2023 -
30.10.2023
|
29.120.70
|
EVS/EVS00
|
|
prEN IEC 61810-7-39:2023
Electrical relays - Tests and Measurements - Part 7-39: Insertion and withdrawal force
|
1.09.2023 -
30.10.2023
|
29.120.70
|
EVS/EVS00
|
|
prEN IEC 61810-7-8:2023
Electrical relays - Tests and Measurements - Part 7-8: Timing
|
1.09.2023 -
30.10.2023
|
29.120.70
|
EVS/EVS00
|
|
prEN IEC 61188-6-3:2023
Circuit boards and circuit board assemblies - Design and use - Part 6-3: Land pattern design - Description of land pattern for through hole components (THT)
|
1.09.2023 -
30.10.2023
|
31.180
31.190
|
EVS/EVS00
|
|
prEN IEC 63184:2023
Assessment Methods of the Human Exposure to Electric and Magnetic Fields from Wireless Power Transfer Systems - Models, Instrumentation, Measurement and Computational Methods and Procedures (Frequency Range of 3 kHz to 30 MHz)
|
1.09.2023 -
30.10.2023
|
17.220.20
17.240
|
EVS/EVS00
|
|
prEN IEC 61810-7-14:2023
Electrical relays - Tests and Measurements - Part 7-14: Mould growth
|
1.09.2023 -
30.10.2023
|
29.120.70
|
EVS/EVS00
|
|
prEN IEC 61810-7-30:2023
Electrical relays - Tests and Measurements - Part 7-30: Contact sticking (delayed release)
|
1.09.2023 -
30.10.2023
|
29.120.70
|
EVS/EVS00
|
|
prEVS 920-5
Katuseehitusreeglid. Osa 5: Lamekatused
Requirements for roof building - Part 5: Flat roofs
|
15.09.2023 -
14.10.2023
|
91.060.20
91.200
|
EVS/TK 60
|
|
EVS 933:2022/prA1
Juhised kantavate tulekustutite kontrolliks ja hoolduseks ning nõuded hoolduspunktidele
Inspection and maintenance instructions for portable fire extinguishers and requirements for service points
|
15.09.2023 -
14.10.2023
|
13.220.10
|
EVS/TK 05
|
|
EN ISO 7539-6:2018/prA1
Corrosion of metals and alloys - Stress corrosion testing - Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement - Amendment 1 (ISO 7539-6:2018/DAM 1:2023)
|
15.09.2023 -
13.11.2023
|
77.060
|
EVS/EVS00
|
|
prEN 622-4
Fibreboards - Specifications - Part 4: Requirements for softboards
|
15.09.2023 -
13.11.2023
|
79.060.20
|
EVS/EVS00
|
|
prEN 1058
Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values
|
15.09.2023 -
13.11.2023
|
79.060.01
|
EVS/EVS00
|
|
prEN 1848-1
Flexible sheets for waterproofing - Determination of length, width and straightness - Part 1: Bitumen sheets for roof waterproofing
|
15.09.2023 -
13.11.2023
|
91.100.50
|
EVS/TK 31
|
|
prEN 12310-1
Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of resistance to tearing (nail shank)
|
15.09.2023 -
13.11.2023
|
91.100.50
|
EVS/TK 31
|
|
EN ISO 17871:2020/prA1
Gas cylinders - Quick-release cylinder valves - Specification and type testing - Amendment 1 (ISO 17871:2020/DAM 1:2023)
|
15.09.2023 -
13.11.2023
|
23.020.35
|
EVS/EVS00
|
|
prEN ISO 20236
Water quality - Determination of total organic carbon (TOC), dissolved organic carbon (DOC), total bound nitrogen (TNb) and dissolved bound nitrogen (DNb) after high temperature catalytic oxidative combustion (ISO/DIS 20236:2023)
|
15.09.2023 -
13.11.2023
|
13.060.50
|
EVS/TK 47
|
|
prEN 14385
Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, Tl and V
|
15.09.2023 -
13.11.2023
|
13.040.40
|
EVS/TK 28
|
|
prEN 17999
Accessible systems for living independently - Requirements and recommendations
|
15.09.2023 -
13.11.2023
|
11.180.01
13.180
|
EVS/TK 11
|
|
prEN ISO 22854
Liquid petroleum products - Determination of hydrocarbon types and oxygenates in automotive-motor gasoline and in ethanol (E85) automotive fuel - Multidimensional gas chromatography method (ISO/DIS 22854:2023)
|
15.09.2023 -
13.11.2023
|
75.080
|
EVS/TK 37
|
|
prEN 12504-5
Testing concrete in structures — Part 5: Determination of concrete cover using electromagnetic covermeters
|
15.09.2023 -
13.11.2023
|
91.100.30
|
EVS/TK 07
|
|
prEN 18007-3
Electromagnetic pulse welding - Part 3: Qualification of welding operators and weld setters
|
15.09.2023 -
13.11.2023
|
25.160.01
25.160.10
|
EVS/TK 41
|
|
prEN 18007-2
Electromagnetic pulse welding - Part 2: Design of welded joints
|
15.09.2023 -
13.11.2023
|
25.160.10
25.160.40
|
EVS/TK 41
|
|
prEN 18007-5
Electromagnetic pulse welding - Part 5: Quality and inspection requirements
|
15.09.2023 -
13.11.2023
|
25.160.10
|
EVS/TK 41
|
|
prEN 18007-4
Electromagnetic pulse welding - Part 4: Specification and qualification of welding procedures
|
15.09.2023 -
13.11.2023
|
25.160.10
|
EVS/TK 41
|
|
prEN 18007-1
Electromagnetic pulse welding - Part 1: Welding knowledge, terminology and vocabulary
|
15.09.2023 -
13.11.2023
|
01.040.25
25.160.10
|
EVS/TK 41
|
|
prEN 14683
Medical face masks - Requirements and test methods
|
15.09.2023 -
13.11.2023
|
11.140
|
EVS/TK 11
|
|
prEN 13795-2
Surgical clothing and drapes - Requirements and test methods - Part 2: Clean air suits
|
15.09.2023 -
13.11.2023
|
11.140
|
EVS/TK 11
|
|
prEN 13795-1
Surgical clothing and drapes - Requirements and test methods - Part 1: Surgical drapes and gowns
|
15.09.2023 -
13.11.2023
|
11.140
|
EVS/TK 11
|
|
prEN ISO 17099
Radiological protection - Performance criteria for laboratories using the cytokinesis block micronucleus (CBMN) assay in peripheral blood lymphocytes for biological dosimetry (ISO/DIS 17099:2023)
|
15.09.2023 -
13.11.2023
|
13.280
|
EVS/TK 28
|
|
EN ISO 15995:2021/prA1
Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated - Amendment 1 (ISO 15995:2021/DAM 1:2023)
|
15.09.2023 -
13.11.2023
|
23.020.35
|
EVS/EVS00
|
|
EN ISO 14245:2021/prA1
Gas cylinders - Specifications and testing of LPG cylinder valves - Self-closing - Amendment 1 (ISO 14245:2021/DAM 1:2023)
|
15.09.2023 -
13.11.2023
|
23.020.35
|
EVS/EVS00
|
|
prEN ISO 4628-3
Paints and varnishes - Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting (ISO/DIS 4628-3:2023)
|
15.09.2023 -
13.11.2023
|
87.040
|
EVS/EVS00
|
|
prEN 18003
Food Authenticity — Determination of 16-O-methylcafestol content of green and roasted coffee — HPLC-method
|
15.09.2023 -
13.11.2023
|
67.140.20
|
EVS/TK 01
|
|
prEN ISO 8044
Corrosion of metals and alloys - Vocabulary (ISO/DIS 8044:2023)
|
15.09.2023 -
13.11.2023
|
01.040.77
77.060
|
EVS/EVS00
|
|
prEN 17997-1
Railway applications - Braking - Definition of ETCS brake curve parameters for Gamma trains - Part 1: Emergency brake curve parameters
|
15.09.2023 -
13.11.2023
|
45.060.01
|
EVS/TK 16
|
|
EN IEC 62271-100:2021/prA1:2023
Amendment 1 - High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers
|
15.09.2023 -
13.11.2023
|
29.130.10
|
EVS/TK 19
|
|
prEN IEC 61557-10:2023
Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 10: Combined measuring equipment
|
15.09.2023 -
13.11.2023
|
17.220.20
29.080.01
29.240.01
|
EVS/EVS00
|
|
prEN IEC 60704-2-9:2023
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-9: Particular requirements for electric hair care appliances
|
15.09.2023 -
13.11.2023
|
17.140.20
97.170
|
EVS/TK 17
|
|
prEN IEC 63439-1-1:2023
Terminology for Electric Power Robots
|
15.09.2023 -
13.11.2023
|
01.040.07
|
|
|
prEN IEC 62841-4-10:2023
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-10: Particular requirements for pole-mounted pruners
|
15.09.2023 -
13.11.2023
|
25.140.20
|
EVS/EVS00
|
|
prEN IEC 61810-7-21:2023
Electrical relays - Tests and Measurements - Part 7-21: Thermal Endurance
|
15.09.2023 -
13.11.2023
|
29.120.70
|
EVS/EVS00
|
|
prEN IEC 80601-2-71:2023
Medical electrical equipment - Part 2-71: Particular requirements for the basic safety and essential performance of functional near-infrared spectroscopy (NIRS) equipment
|
15.09.2023 -
13.11.2023
|
11.040.55
|
EVS/TK 11
|
|
prEN IEC 62974-1:2023
Monitoring and measuring systems used for data collection, gathering and analysis - Part 1: Device requirements
|
15.09.2023 -
13.11.2023
|
17.220.20
|
EVS/EVS00
|
|
prEN 45560
Method to achieve circular designs of products
|
15.09.2023 -
13.11.2023
|
03.100.99
13.020.60
|
EVS/EVS00
|
|
prEN IEC 62841-4-9:2023
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-9: Particular requirements for battery-operated chain saws for tree service
|
15.09.2023 -
13.11.2023
|
25.140.20
|
EVS/EVS00
|
|
prEN IEC 62841-4-10:2023/prAA:2023
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-10: Particular requirements for pole-mounted pruners
|
15.09.2023 -
13.11.2023
|
25.140.20
|
EVS/EVS00
|
|
prEN IEC 62841-4-9:2023/prAA:2023
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-9: Particular requirements for chain saws for tree service
|
15.09.2023 -
13.11.2023
|
25.140.20
|
EVS/EVS00
|
|
prEN ISO 8362-2
Injection containers and accessories - Part 2: Closures for injection vials (ISO/DIS 8362-2:2023)
|
15.09.2023 -
13.11.2023
|
11.040.20
|
EVS/EVS00
|
|
prEN 1998-4
Eurocode 8 - Design of structures for earthquake resistance - Part 4: Silos, tanks, pipelines, towers, masts and chimneys
|
15.09.2023 -
13.11.2023
|
91.010.30
91.060.40
91.120.25
|
EVS/TK 13
|
|
prEN 1998-1-2
Eurocode 8 - Design of structures for earthquake resistance - Part 1-2: Buildings
|
15.09.2023 -
13.11.2023
|
91.120.25
|
EVS/TK 13
|
|
prEN ISO 12957-2
Geosynthetics - Determination of friction characteristics - Part 2: Inclined plane test (ISO/DIS 12957-2:2023)
|
15.09.2023 -
13.11.2023
|
59.080.70
|
EVS/TK 31
|
|
prEN ISO 1514
Paints and varnishes - Standard panels for testing (ISO/DIS 1514:2023)
|
15.09.2023 -
13.11.2023
|
87.100
|
EVS/EVS00
|
|
prEN ISO 2884-2
Paints and varnishes - Determination of viscosity using rotational viscometers - Part 2: Relative measurement of viscosity using disc or ball spindles at specified speeds (ISO/DIS 2884-2:2023)
|
15.09.2023 -
13.11.2023
|
87.040
|
EVS/EVS00
|
|
prEN ISO 2884-1
Paints and varnishes - Determination of viscosity using rotational viscometers - Part 1: Absolute viscosity measurement with cone-plate measuring geometry at high shear rates (ISO/DIS 2884-1:2023)
|
15.09.2023 -
13.11.2023
|
87.040
|
EVS/EVS00
|
|
prEN 1998-3
Eurocode 8 - Design of structures for earthquake resistance - Part 3: Assessment and retrofitting of buildings and bridges
|
15.09.2023 -
13.11.2023
|
91.010.30
91.120.25
|
EVS/TK 13
|
|
prEN ISO 19103
Geographic information - Conceptual schema language (ISO/DIS 19103:2023)
|
15.09.2023 -
13.11.2023
|
35.240.70
|
EVS/EVS00
|
|
prEN ISO 16784-1
Corrosion of metals and alloys - Corrosion and fouling in industrial cooling water systems - Part 1: Guidelines for conducting pilot-scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems (ISO/DIS 16784-1:2023)
|
15.09.2023 -
13.11.2023
|
77.060
|
EVS/EVS00
|
|
prEN ISO 16701
Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution (ISO/DIS 16701:2023)
|
15.09.2023 -
13.11.2023
|
77.060
|
EVS/EVS00
|
|
prEN 17990
Thermal insulation and energy economy in buildings - Method to determine the durability of bondings with adhesive tapes and adhesive masses for the establishment of airtight layers under climatic conditions representative for indoor environments
|
15.09.2023 -
13.11.2023
|
91.120.10
|
EVS/TK 14
|
|
prEN 1991-1-7
Eurocode 1 - Actions on structures - Part 1-7: Accidental actions
|
15.09.2023 -
13.11.2023
|
91.010.30
|
EVS/TK 13
|
|
prEN 1993-5
Eurocode 3 - Design of steel structures - Part 5: Piling
|
15.09.2023 -
13.11.2023
|
91.010.30
91.080.13
|
EVS/TK 13
|
|
prEN 1993-1-14
Eurocode 3 - Design of steel structures - Part 1-14: Design assisted by finite element analysis
|
15.09.2023 -
13.11.2023
|
91.010.30
91.080.13
|
EVS/TK 13
|
|
prEN IEC 62676-2-11:2023
Alarm systems - Video Surveillance Systems (VSS) for use in security applications - Part 2-11: Video transmission protocols - Interop profiles for VMS- and cloud VSaaS-systems for safe-cities and law-enforcement
|
15.09.2023 -
13.11.2023
|
99.99
|
EVS/TK 71
|
|
prEN IEC 61810-7-6:2023
Electrical relays - Tests and Measurements - Part 7-6: Contact-circuit resistance (or voltage drop)
|
15.09.2023 -
13.11.2023
|
29.120.70
|
EVS/EVS00
|
|
prEN IEC 63270:2023
Industrial automation equipment and systems - Predictive maintenance
|
15.09.2023 -
13.11.2023
|
99.99
|
EVS/EVS00
|
|
prEN IEC 61039:2023
Classification of insulating liquids
|
15.09.2023 -
13.11.2023
|
29.040.10
|
EVS/EVS00
|
|
prEN IEC 61203:2023
Synthetic esters - Guidelines for maintenance and use in electrical equipment
|
15.09.2023 -
13.11.2023
|
29.040.10
29.180
|
EVS/EVS00
|
|
prEN IEC 61025:2023
Fault tree analysis (FTA)
|
15.09.2023 -
13.11.2023
|
03.120.01
03.120.99
|
EVS/EVS00
|
|
prEN 300 468 V1.18.0
Digital Video Broadcasting (DVB);
Specification for Service Information (SI) in DVB systems
|
15.09.2023 -
13.11.2023
|
33
|
EVS/EVS00
|
|
prEVS 875-4
Vara hindamine. Osa 4: Hindaja kutse-eetika ja hindamistulemuste esitamine
Property valuation - Part 4: Professional ethics of an appraiser and valuation reporting
|
30.12.2022 -
28.01.2023
|
03.060
03.080
91.040
93.010
|
EVS/TK 36
|
Kommenteerimine lõppenud
|
prEVS 871
Tuletõkke- ja evakuatsiooni avatäited ja sulused. Kasutamine
Fire resisting and emergency exit doors and door hardware - Use
|
30.12.2022 -
27.02.2023
|
13.220.20
91.060.50
|
EVS/TK 15
|
Kommenteerimine lõppenud
|
prEVS 941
Ehitustööde üldised kvaliteedinõuded. Kütte ja jahutussüsteemid
General quality requirements for construction works. Heating and cooling systems.
|
1.03.2023 -
29.04.2023
|
91.140.30
|
EVS/TK 27
|
Kommenteerimine lõppenud
|
prEVS 945
Reovee väikepuhasti projekteerimine (kuni 1999 IE)
Design of Small Sewage Treatment Plant (up to 1999 IE)
|
1.03.2023 -
29.04.2023
|
13.030
13.060.30
91.140.80
93.030
|
EVS/TK 48
|
Kommenteerimine lõppenud
|
prEN ISO 2620
Analysis of natural gas - Biomethane - Determination of VOCs by thermal desorption gas chromatography with flame ionization and/or mass spectrometry detectors (ISO/DIS 2620:2023)
|
3.07.2023 -
31.08.2023
|
75.060
|
EVS/TK 65
|
Kommenteerimine lõppenud
|
prEN ISO 2615
Analysis of natural gas - Biomethane - Determination of the content of compressor oil (ISO/DIS 2615:2023)
|
3.07.2023 -
31.08.2023
|
75.060
|
EVS/TK 65
|
Kommenteerimine lõppenud
|